882 W Cienega Ave
San dimas, CA 91773
Represent L&G Enterprises and Custom Truck Shop in this loose fitting Dolman.
Represent L&G Enterprises and Custom Truck Shop in this longer length tank top.
This was the show shirt for out Custom Truck & Rod Show Off 2012. Limited quantities available.
L&G Enterprises and Custom Truck Shop are both featured on this shirt design with a classic distressed look in a vintage creme color.
At work, in the garage, or just out on the town, this LGE*CTS Motorsports work shirt will keep you looking sharp.
300P is a larger portable compressor kit that is capable of inflating up to 33-inch tires easily by simply clamping the power leads to your battery, connecting the tire chuck to the valve stem and turning the unit on. Tire pressure can be checked using the 5-in-1 Inflator/Deflator inline pressure gauge.
Up to 33" Tires2.40 CFM @ 0 PSI
Aluminum Sand Tray with Vibration Isolators
Deluxe Dual Compartment Carry Bag
3-pc. Inflation Tips Kit
5-in-1 Inflator/Deflator with Inline 100 PSI Gauge
Dual Battery Clamps
40-amp Inline Fuse Holder
Power Cord: 8 ft. / Air Hose: 25 ft.
For the added convenience of being able to air-up or air-down your tires to accommodate various types of terrain, a Smittybilt Air Compressor is the most powerful compression unit in its class with a 1/3 horsepower oil-less direct drive motor and a 30 amp inline fuse.
Easy twist screw-on brass inflator top
Quick release 16-foot coil hose
Anti-vibration rubber feet
Can be permanently mounted and hard-wired
Auto-thermal cutoff switch -- protects motor against damage
Built-on cleanable airfilter
Storage bag included
Maximum airflow - 72 liters per minute
Maximum voltage - 13.8 volts
Maximum amperage draw @ 120 psi
Maximum restart pressure - 150 psi
Maximum operating temperature - 140 deg F
Minimum operating temperature - 67 deg F
Maximum continuous cycle time (Duty cycle) - 40 minutes @ 40 psi @ 75 def F
Integrated 150 PSI - Easy to read pressure gauge
The model 6120 air compressor is a all-in-one 110 psi onboard air system. The compressor comes pre-mounted on the tank and with the pressure switch and fittings pre-installed. The 6120 is compact any simple to hook up and install. Great for smaller train horns, truck horns, and air horns.
110 PSI compressor
3 liter air tank
Built-in 85/105 PSI pressure switch
0-150 PSI built-in air pressure gauge
Compression fitting for 1/4" O.D. tubing
12ft 1/4" O.D. tubing
Mounting brackets & hardware
VIAIR’s Constant Duty Onboard Air System is a pre-packaged compressed air solution that provides a 100% duty cycle 450C compressor, 2.5 gallon air tank, and all components needed to install a working system capable of inflating tires.
For 37" or larger Tires1.66 CFM @ 0 PSI
2.5 Gallon VIAIR Air Tank
450C VIAIR Compressor
35ft. Coil Hose
1/4” NPT Quick Connect Stud (F)
1/4” NPT Quick Connect Coupler (M)
Dash Panel Gauge with ON/OFF Switch
Pressure Switch with Relay (110 PSI on, 150 PSI off)
Reducer (1/8” NPT F to 1/4” NPT M)
1/4” NPT 175 PSI Safety Valve
1/4” NPT Drain Cock
(3) 1/4” NPT Compression Fittings
4” Strip of Continuous Grommet Material
20ft. 12-Gauge Wire with Inline Fuse Holder
882 W Cienega Ave,
San dimas, CA 91773