Jeep JL 2018

  • CLEAR ALL

SORT BY

  • LOW - HIGH
  • HIGH - LOW
  • A - Z
  • Z - A
Jeep JL Fabtech 3″ SPORT SYSTEM W/ STEALTH SHOCKS

$839.99

image

The Sport system features American made coil springs that are a Dual Rate design allowing for long travel suspension use offroad with a smooth highway ride.

The first stage of the spring provides a soft ride with the ability to extend for additional travel. The second stage is designed to handle the payload of the vehicle and address large impact absorption at higher speeds.

The Dual Rate coil springs are corner specific to the JL. This keeps the vehicle level side to side while allowing for increased suspension travel.

Four bump stops extensions utilize the factory bump stops for compliant cushioning at full compression. The extensions retain the stock down travel to eliminate over cycling of the suspension and driveline.

The extended length front and rear sway bar links with urethane bushings re-position the bars to work within the factory operating planes. By extending the length of the links, it prevents the sway bar from going over center and creating bind at full extension travel.

A heavy duty rear track bar bracket re-centers the axle while retaining the factory roll center of the vehicle with the increased ride height.

 KIT INCLUDES:
  • Front & Rear Dual Rate Coil Springs
  • Front & Rear Sway Bar Links
  • Front & Rear Bump Stop Extensions
  • Rear Track Bar Bracket
  • Front & Rear Stealth Monotube Shocks

TIRES & WHEELS FITMENT

STOCK FENDERS
  • Tire Size – 35/12.50R17 Wheel Size – 17X9 w/ 4.5in BS w/minor trimming
  • Tire Size – 35/12.50R18 Wheel Size – 18X9 w/ 4.5in BS w/minor trimming
  • Tire Size – 325/60R20 Wheel Size – 20X9 w/ 5in BS w/minor trimming
HIGH CLEARANCE FENDERS
  • Tire Size – 37/12.50R17 Wheel Size – 17X9 w/ 4.5in BS w/cutting
  • Tire Size – 37/12.50R18 Wheel Size – 18X9 w/ 4.5in BS w/cutting
  • Tire Size – 37/12.50R20 Wheel Size – 20X9 w/ 5in BS w/cutting
hidden field
Icon Vehicle Dynamics Jeep JL 2.5" Suspension System - Stage 1

$1199.99

image

Through an accelerated testing process dubbed the “ICON1K” R&D program, ICON has logged over a thousand miles in the dirt pushing the JL to off-road extremes to identify limiting factors in OE components, develop products that remove these limits, and further extrapolate performance out of this vehicle. This 2.5” suspension system has been tweaked, tuned, and revised several times over the course of this ICON1K testing in an effort to provide unparalleled ride quality and vehicle dynamics for everything from rock crawling to high-speed desert running.

The ICON Vehicle Dynamics Stage 1 2.5" Suspension System for the 2018-UP Jeep Wrangler JL is designed for the driver looking to drastically improve the performance and ride quality of their vehicle. The Stage 1 system is ICON's entry level offering for Jeep enthusiasts looking to add lift height and wheel travel to their JL without breaking the bank. This system includes 2.5" lift dual rate coil springs, Vehicle Specific 2.0 Aluminum Series shocks, bump stop spacers, sway bar links, and all necessary hardware to complete the installation. With this combination of components, ICON was able to increase wheel travel numbers by over 30% (3" front, 2" rear), redefining the potential of the 2018-UP JL. The Stage 1 system allows for fitment of 35" tires when used with ICON's recommended wheel specifications. For users looking to install 37" tires, an optional extended bump stop spacer kit (PN: 22029) is available. 

Holistic Engineering - the ICON Difference
When developing suspension components for a new vehicle, ICON takes a different approach than many others. Rather than focusing in on one particular part, ICON engineers look at the vehicle as a whole, identify inherent strengths and weaknesses, and set a target for performance. With a focus on maximizing wheel travel and improving ride quality, ICON will develop components that address (and often times replace) OE limiting factors. This "holistic engineering" philosophy often results in the development of several parts designed to work together as a system to provide a balanced on and off-road performance upgrade. Because ICON is designing and manufacturing all of the components necessary to improve the performance of a vehicle from front to back, end-users can rest easy knowing they are dealing with ONE manufacturer, ONE standard of quality, and ONE awesome warranty to back it all up.

 

SYSTEM COMPONENTS:

JL 2.5" FRONT DUAL RATE COIL SPRING KIT

JL 2.5" REAR DUAL RATE COIL SPRING KIT

JL 2.5" FRONT 2.0 ALUMINUM SERIES SHOCK VS IR

JL 2.5" REAR 2.0 ALUMINUM SERIES SHOCK VS IR

WHEEL & TIRE FITMENT INFO:

OEM Wheels & Tires: Yes

Aftermarket Wheels: 8.5 Wide, 4.75" Backspace

Aftermarket Tires: 35 x 12.50 (37 x 12.50 with optional extended bump stop spacer kit PN: 22029)

OTHER STAGES AND UPGRADES OF THIS KIT AVAILABLE! CALL FOR PRICING (909)599-2228

hidden field
ICON VEHICLE DYNAMICS JEEP JL 2.5" SUSPENSION SYSTEM - STAGE 2

$1499.00

image

Through an accelerated testing process dubbed the “ICON1K” R&D program, ICON has logged over a thousand miles in the dirt pushing the JL to off-road extremes to identify limiting factors in OE components, develop products that remove these limits, and further extrapolate performance out of this vehicle. This 2.5” suspension system has been tweaked, tuned, and revised several times over the course of this ICON1K testing in an effort to provide unparalleled ride quality and vehicle dynamics for everything from rock crawling to high-speed desert running.

The ICON Vehicle Dynamics Stage 2 2.5" Suspension System for the 2018-UP Jeep Wrangler JL is designed for the driver looking to drastically improve the performance and ride quality of their vehicle.  This Stage 2 system includes 2.5" lift dual rate coil springs, Vehicle Specific 2.0 Aluminum Series shocks, tubular steel front lower links, bump stop spacers, sway bar links, and all necessary hardware to complete the installation. With this combination of components, ICON was able to increase wheel travel numbers by over 30% (3" front, 2" rear), redefining the potential of the 2018-UP JL. The front lower links included with this system are constructed from thick wall steel tubing, provide increased castor numbers, and feature dual durometer bushings for noise free operation, maximum articulation, and minimal bind. The Stage 2 system allows for fitment of 35" tires when used with ICON's recommended wheel specifications. For users looking to install 37" tires, an optional bump stop spacer kit (PN: 22029) is available. 

KEY FEATURES:

  • 2.5" lift height
  • Fits 35" tires (37" with optional bump stop spacer kit PN: 22029)
  • 3" front, 2" rear increase in wheel travel
  • Improves on and off-road ride quality over stock
  • Dual rate coil springs with lifetime guarantee against sagging/breakage
  • 2.0 Aluminum Series shocks with vehicle specific valving
  • Tubular steel link arms with dual durometer bushings for noise free performance, maximum articulation, and minimal bind
  • 100% bolt-on system makes for an easy install
  • “ICON 1K” tested under rigorous off-road conditions to validate tune, performance, strength, and durability
 

TECH INFO:

  • Recommended wheel and tire fitment is based on a JL Rubicon
  • Advertised lift heights based on a stock, 4 door JL Rubicon

 

WHEEL & TIRE FITMENT INFO:

OEM Wheels & Tires: Yes

Aftermarket Wheels: 8.5 Wide, 4.75" Backspace

Aftermarket Tires: 35 x 12.50 (37 x 12.50 with optional bump stop spacer kit PN: 22029)

 

SYSTEM COMPONENTS:

22021 (QTY.1) | 18-UP JL LOWER FRONT LINK ARM KIT

22025 (QTY.1) | 18-UP JL 2.5" FRONT DUAL RATE COIL SPRING KIT

22026 (QTY.1) | 18-UP JL 2.5" REAR DUAL RATE COIL SPRING KIT

26523 (QTY.2) | 18-UP JL 2.5" FRONT 2.0 ALUMINUM SERIES SHOCK VS IR

26524 (QTY.2) | 18-UP JL 2.5" REAR 2.0 ALUMINUM SERIES SHOCK VS IR

 

hidden field
ICON VEHICLE DYNAMICS JEEP JL 2.5" SUSPENSION SYSTEM - STAGE 5

$3499.00

image

Through an accelerated testing process dubbed the “ICON1K” R&D program, ICON has logged over a thousand miles in the dirt pushing the JL to off-road extremes to identify limiting factors in OE components, develop products that remove these limits, and further extrapolate performance out of this vehicle. This 2.5” suspension system has been tweaked, tuned, and revised several times over the course of this ICON1K testing in an effort to provide unparalleled ride quality and vehicle dynamics for everything from rock crawling to high-speed desert running.

The ICON Vehicle Dynamics Stage 5 2.5" Suspension System for the 2018-UP Jeep Wrangler JL is designed for the driver looking to drastically improve the performance and ride quality of their vehicle.  This Stage 5 system includes 2.5" lift dual rate coil springs, upgraded 2.5 Series shocks with vehicle specific valving, tubular steel front lower links, adjustable front and rear track bars, bump stop spacers, sway bar links, and all necessary hardware to complete the installation. With this combination of components, ICON was able to increase wheel travel numbers by over 30% (3" front, 2" rear), redefining the potential of the 2018-UP JL. The front lower links included with this system are constructed from thick wall steel tubing, provide increased castor numbers, and feature dual durometer bushings for noise free operation, maximum articulation, and minimal bind. The Stage 5 system allows for fitment of 35" tires when used with ICON's recommended wheel specifications. For users looking to install 37" tires, an optional bump stop spacer kit (PN: 22029) is available. 

KEY FEATURES:

  • 2.5" lift height
  • Fits 35" tires (37" with optional bump stop spacer kit PN: 22029)
  • 3" front, 2" rear increase in wheel travel
  • Improves on and off-road ride quality over stock
  • Dual rate coil springs with lifetime guarantee against sagging/breakage
  • 2.5 Series shocks with vehicle specific valving
  • Tubular steel link arms with dual durometer bushings for noise free performance, maximum articulation, and minimal bind
  • 100% bolt-on system makes for an easy install
  • “ICON 1K” tested under rigorous off-road conditions to validate tune, performance, strength, and durability
 
WHEEL & TIRE FITMENT INFO:

OEM Wheels & Tires: Yes

[NON-RUBICON]

  • Aftermarket Wheels: 8.5″ Wide, 4.5″ backspace
  • Aftermarket Tires : 35" x 12.50 (Larger tires will fit with recommended bump stop spacer kit and minor trimming)

[RUBICON]

  • Aftermarket Wheels: 8.5″ Wide, 4.75″ backspace
  • Aftermarket Tires: 35" X 12.50 (37" tires will fit with recommended bump stop spacer kit PN: 22029)
 

SYSTEM COMPONENTS:

22021 (QTY.1) | 18-UP JL FRONT FIXED LOWER LINK KIT

22025 (QTY.1) | 18-UP JL 2.5" FRONT DUAL RATE COIL SPRING KIT

22026 (QTY.1) | 18-UP JL 2.5" REAR DUAL RATE COIL SPRING KIT

22027 (QTY.1) | 18-UP JL FRONT ADJ TRACK BAR KIT

22028 (QTY.1) | 18-UP JL REAR ADJ TRACK BAR KIT

27821P (QTY.1) | 18-UP JL 2.5" FRONT 2.5 VS RR PAIR

27726P (QTY.1) | 18-UP JL 2.5" REAR 2.5 VS PB PAIR

 

hidden field
ICON VEHICLE DYNAMICS JEEP JL 2.5" SUSPENSION SYSTEM - STAGE 8

$5149.00

image

Through an accelerated testing process dubbed the “ICON1K” R&D program, ICON has logged over a thousand miles in the dirt pushing the JL to off-road extremes to identify limiting factors in OE components, develop products that remove these limits, and further extrapolate performance out of this vehicle. This 2.5” suspension system has been tweaked, tuned, and revised several times over the course of this ICON1K testing in an effort to provide unparalleled ride quality and vehicle dynamics for everything from rock crawling to high-speed desert running.

The ICON Vehicle Dynamics Stage 8 2.5" Suspension System for the 2018-UP Jeep Wrangler JL is designed for the driver looking to drastically improve the performance and ride quality of their vehicle.  This Stage 8 system includes 2.5" lift dual rate coil springs, upgraded 2.5 Series remote reservoir shocks with vehicle specific valving and ICON's CDC (Compression Damping Control) technology, tubular steel adjustable front upper links, fixed front lower links, fixed rear upper links, adjustable rear lower links, adjustable front and rear track bars, bump stop spacers, sway bar links, and all necessary hardware to complete the installation. With this combination of components, ICON was able to increase wheel travel numbers by over 30% (3" front, 2" rear), redefining the potential of the 2018-UP JL. The front lower links included with this system are constructed from thick wall steel tubing, provide increased castor numbers, and feature dual durometer bushings for noise free operation, maximum articulation, and minimal bind. The Stage 8 system allows for fitment of 35" tires when used with ICON's recommended wheel specifications. For users looking to install 37" tires, an optional bump stop spacer kit (PN: 22029) is available. 

KEY FEATURES:

  • 2.5" lift height
  • Fits 35" tires (37" with optional bump stop spacer kit PN: 22029)
  • 3" front, 2" rear increase in wheel travel
  • Improves on and off-road ride quality over stock
  • Dual rate coil springs with lifetime guarantee against sagging/breakage
  • 2.5 Series shocks with vehicle specific valving
  • Tubular steel link arms with dual durometer bushings for noise free performance, maximum articulation, and minimal bind
  • 100% bolt-on system makes for an easy install
  • “ICON 1K” tested under rigorous off-road conditions to validate tune, performance, strength, and durability
 
WHEEL & TIRE FITMENT INFO:

OEM Wheels & Tires: Yes

[NON-RUBICON]

  • Aftermarket Wheels: 8.5″ Wide, 4.5″ backspace
  • Aftermarket Tires : 35" x 12.50 (Larger tires will fit with recommended bump stop spacer kit and minor trimming)

[RUBICON]

  • Aftermarket Wheels: 8.5″ Wide, 4.75″ backspace
  • Aftermarket Tires: 35" X 12.50 (37" tires will fit with recommended bump stop spacer kit PN: 22029)
 

SYSTEM COMPONENTS:

22021 (QTY.1) | 18-UP JL FRONT FIXED LOWER LINK KIT

22022 (QTY.1) | 18-UP JL FRONT ADJ UPPER LINK KIT

22023 (QTY.1) | 18-UP JL REAR ADJ LOWER LINK KIT

22024 (QTY.1) | 18-UP JL REAR FIXED UPPER LINK KIT

22025 (QTY.1) | 18-UP JL 2.5" FRONT DUAL RATE COIL SPRING KIT

22026 (QTY.1) | 18-UP JL 2.5" REAR DUAL RATE COIL SPRING KIT

22027 (QTY.1) | 18-UP JL FRONT ADJ TRACK BAR KIT

22028 (QTY.1) | 18-UP JL REAR ADJ TRACK BAR KIT

27821CP (QTY.1) | 18-UP JL 2.5" FRONT 2.5 VS RR CDCV PAIR

27726CP (QTY.1) | 18-UP JL 2.5" REAR 2.5 VS PB CDCV PAIR

 

hidden field

LGE-CTS Motorsports

882 W Cienega Ave,

San dimas, CA 91773

Phone. 909-599-2203

Email. TRICIA@LGE-PAINT.COM