SUSPENSION

SORT BY

  • LOW - HIGH
  • HIGH - LOW
  • A - Z
  • Z - A
Icon 17+ Raptor Stage 2 Kit

$8399.00

image

The front end geometry of the Gen 2 Raptor was found to be fairly similar to the previous model truck, however the shock mounting points had been moved higher up on the chassis. Seeing this as an opportunity, the team was able to design a 3.0 Series coilover that has more shaft travel while utilizing a barreled coil spring for more efficient packaging. The vehicle-specific valving featured in these shocks and the all new ICON-engineered spring work together to provide exceptional on-road ride quality with excellent off-road characteristics. ICON’s multi-stage hydraulic “Bump Zone” adds to the performance capability by providing an exponential increase in damping ability during the last 40% of compression travel for superior bottom-out resistance. In the ride zone, these 3.0 Series coilovers see a 50% increase in damping ability with the use of a significantly larger piston than what is found in the factory shocks. New 10” finned aluminum reservoirs provide a generous amount of shock oil while also providing an increase in surface area for enhanced cooling and consistent damping. The addition of ICON’s CDC Valve technology provides 10 settings of damping adjustment allowing the end-user to adjust the “feel” of the shocks for different terrains and vehicle cargo configurations. All of these features work together to deliver the perfect blend of on-road comfort and off-road performance.

KEY FEATURES:

  • Adjustable coilovers yield 1-3” of front lift height

  • Increased wheel travel and vehicle specific valving provides unrivaled ride quality across a wide range of on and off-road use

  • 50% increase in damping ability over OE shocks for excellent performance in extreme off-road conditions

  • Superior low speed control reduces body roll and increases on-road stability

  • Easy-to-adjust CDC Valve (Compression Damping Control) has 10 compression damping settings to suit all types of driving styles across varying terrain and vehicle cargo setups 

  • ICON’s multi-stage hydraulic “Bump Zone” exponentially increases bottom-out resistance in the last 40% of compression travel

  • 10" finned aluminum reservoirs provide generous oil volume and increased surface area for enhanced cooling properties and consistent damping

  • Barreled coil spring design maximizes travel and provides more efficient packaging

  • High quality ICON-engineered coil springs are guaranteed for life against sagging or breakage

  • Heavy duty CNC machined 1” shock shafts

  • FK Rod End COM12 spherical bearings ensure maximum strength and durability

  • CAD plated shock body with hard anodized piston and top cap

  • Fully serviceable design allows for revalves, rebuilds, and an immeasurable service life

  • Bolt-in design makes for an easy install into OEM shock location

  • “ICON 1K” tested under rigorous off-road conditions to validate tune, performance, strength, and durability

he rear of the updated Ford Raptor was a highlight for ICON engineers, as new changes proved to be for the better. One significant change was that the shock mounting layout went from a parallel style setup to an offset design. While this is great for controlling axle wrap, it required a thorough reevaluation of the way ICON shocks would need to function to make the most of the refreshed rear end. In the R&D process it was found that Gen 2 had more available wheel travel than the original Raptor, and by way of an offset upper eyelet ICON engineers laid out a 3.0 Series bypass shock that maximized travel while utilizing the factory shock mounts. To control the rear end in specific ranges of travel, these shocks feature 3 unique bypass zones – 2 on the compression stroke and one rebound. Unlike other shocks that have a loud bypass “click” when functioning, ICON bypass valves feature damped valve stops for quiet and precise operation. Easy-to-adjust knobs allow for quick changes to shock tuning without the need for tools, enabling the user to dial in their ride with minimal down time. When in use on and off-road, ICON’s patented Anti-Wobble Link stabilizes the shocks to prevent rotation and possible collision. Additionally, urethane shin guards protect the shock shafts and rod ends under grueling off-road conditions.

KEY FEATURES:

  • 3-tube bypass design and "Bump Zone" technology provides multiple unique zones of damping and rebound control

  • 50% increase in damping ability over OE shocks for excellent performance in extreme off-road conditions

  • 12" finned aluminum reservoirs provide generous oil volume and increased surface area for enhanced cooling properties and consistent damping

  • Offset upper eyelet with patented ICON Anti-Wobble link for optimized shock mounting and packaging

  • Easy-to-adjust detented knobs offer quick adjustability without the use of tools

  • Specially engineered damped valve stops for quiet and precise operation without the loud “clicking” noise common with other brands

  • Heavy duty CNC machined 1” shock shafts

  • FK Rod End COM12 spherical bearings ensure maximum strength and durability

  • Urethane shin guards help to protect the shock shaft & rod end from premature wear

  • CAD plated shock body with hard anodized piston and top cap

  • Fully serviceable design allows for revalves, rebuilds, and an immeasurable service life

  • Bolt-in design makes for an easy install into OEM shock location

  • “ICON 1K” tested under rigorous off-road conditions to validate tune, performance, strength, and durability

This ICON billet aluminum upper control arm kit is designed to improve the overall performance of the new Ford Raptor with corrected front end geometry, adjustable camber and caster, and improved suspension component clearance. These are constructed of CNC machined 6061 billet aluminum merging light weight with high strength properties. Replacing the OE ball joint with the available ICON Delta Joint allows for full bump and droop travel of the front suspension while eliminating bind. FK Rod End 7/8” heim joints provide precise and smooth function throughout the range of travel while ICON’s signature double adjuster sleeve allows for on-vehicle camber and caster adjustment. Included with all components and hardware necessary for a complete install, these billet UCAs are the perfect upgrade for the 2017-UP Ford Raptor.

KEY FEATURES:

  • CNC machined 6061 billet aluminum construction for light weight and exceptional strength
  • Features ICON's Delta Joint 
  • Camber and caster adjustability allows for precise wheel alignment
  • ICON double adjuster sleeves allow for on-vehicle adjustment
  • Vehicle specific taper pin provides OE-like fitment
  • PTFE Lined 7/8” FK Rod Ends for improved response
  • Built in o-ring sealed dust cover cap
hidden field
Icon 17+ Raptor Stage 4 Kit

$11699.00

image
DESCRIPTION

The front end geometry of the Gen 2 Raptor was found to be fairly similar to the previous model truck, however the shock mounting points had been moved higher up on the chassis. Seeing this as an opportunity, the team was able to design a 3.0 Series coilover that has more shaft travel while utilizing a barreled coil spring for more efficient packaging. The vehicle-specific valving featured in these shocks and the all new ICON-engineered spring work together to provide exceptional on-road ride quality with excellent off-road characteristics. ICON’s multi-stage hydraulic “Bump Zone” adds to the performance capability by providing an exponential increase in damping ability during the last 40% of compression travel for superior bottom-out resistance. In the ride zone, these 3.0 Series coilovers see a 50% increase in damping ability with the use of a significantly larger piston than what is found in the factory shocks. New 10” finned aluminum reservoirs provide a generous amount of shock oil while also providing an increase in surface area for enhanced cooling and consistent damping. The addition of ICON’s CDC Valve technology provides 10 settings of damping adjustment allowing the end-user to adjust the “feel” of the shocks for different terrains and vehicle cargo configurations. All of these features work together to deliver the perfect blend of on-road comfort and off-road performance.

KEY FEATURES:

  • Adjustable coilovers yield 1-3” of front lift height

  • Increased wheel travel and vehicle specific valving provides unrivaled ride quality across a wide range of on and off-road use

  • 50% increase in damping ability over OE shocks for excellent performance in extreme off-road conditions

  • Superior low speed control reduces body roll and increases on-road stability

  • Easy-to-adjust CDC Valve (Compression Damping Control) has 10 compression damping settings to suit all types of driving styles across varying terrain and vehicle cargo setups 

  • ICON’s multi-stage hydraulic “Bump Zone” exponentially increases bottom-out resistance in the last 40% of compression travel

  • 10" finned aluminum reservoirs provide generous oil volume and increased surface area for enhanced cooling properties and consistent damping

  • Barreled coil spring design maximizes travel and provides more efficient packaging

  • High quality ICON-engineered coil springs are guaranteed for life against sagging or breakage

  • Heavy duty CNC machined 1” shock shafts

  • FK Rod End COM12 spherical bearings ensure maximum strength and durability

  • CAD plated shock body with hard anodized piston and top cap

  • Fully serviceable design allows for revalves, rebuilds, and an immeasurable service life

  • Bolt-in design makes for an easy install into OEM shock location

  • “ICON 1K” tested under rigorous off-road conditions to validate tune, performance, strength, and durability

he rear of the updated Ford Raptor was a highlight for ICON engineers, as new changes proved to be for the better. One significant change was that the shock mounting layout went from a parallel style setup to an offset design. While this is great for controlling axle wrap, it required a thorough reevaluation of the way ICON shocks would need to function to make the most of the refreshed rear end. In the R&D process it was found that Gen 2 had more available wheel travel than the original Raptor, and by way of an offset upper eyelet ICON engineers laid out a 3.0 Series bypass shock that maximized travel while utilizing the factory shock mounts. To control the rear end in specific ranges of travel, these shocks feature 3 unique bypass zones – 2 on the compression stroke and one rebound. Unlike other shocks that have a loud bypass “click” when functioning, ICON bypass valves feature damped valve stops for quiet and precise operation. Easy-to-adjust knobs allow for quick changes to shock tuning without the need for tools, enabling the user to dial in their ride with minimal down time. When in use on and off-road, ICON’s patented Anti-Wobble Link stabilizes the shocks to prevent rotation and possible collision. Additionally, urethane shin guards protect the shock shafts and rod ends under grueling off-road conditions.

KEY FEATURES:

  • 3-tube bypass design and "Bump Zone" technology provides multiple unique zones of damping and rebound control

  • 50% increase in damping ability over OE shocks for excellent performance in extreme off-road conditions

  • 12" finned aluminum reservoirs provide generous oil volume and increased surface area for enhanced cooling properties and consistent damping

  • Offset upper eyelet with patented ICON Anti-Wobble link for optimized shock mounting and packaging

  • Easy-to-adjust detented knobs offer quick adjustability without the use of tools

  • Specially engineered damped valve stops for quiet and precise operation without the loud “clicking” noise common with other brands

  • Heavy duty CNC machined 1” shock shafts

  • FK Rod End COM12 spherical bearings ensure maximum strength and durability

  • Urethane shin guards help to protect the shock shaft & rod end from premature wear

  • CAD plated shock body with hard anodized piston and top cap

  • Fully serviceable design allows for revalves, rebuilds, and an immeasurable service life

  • Bolt-in design makes for an easy install into OEM shock location

  • “ICON 1K” tested under rigorous off-road conditions to validate tune, performance, strength, and durability

This ICON billet aluminum upper control arm kit is designed to improve the overall performance of the new Ford Raptor with corrected front end geometry, adjustable camber and caster, and improved suspension component clearance. These are constructed of CNC machined 6061 billet aluminum merging light weight with high strength properties. Replacing the OE ball joint with the available ICON Delta Joint allows for full bump and droop travel of the front suspension while eliminating bind. FK Rod End 7/8” heim joints provide precise and smooth function throughout the range of travel while ICON’s signature double adjuster sleeve allows for on-vehicle camber and caster adjustment. Included with all components and hardware necessary for a complete install, these billet UCAs are the perfect upgrade for the 2017-UP Ford Raptor.

KEY FEATURES:

  • CNC machined 6061 billet aluminum construction for light weight and exceptional strength
  • Features ICON's Delta Joint 
  • Camber and caster adjustability allows for precise wheel alignment
  • ICON double adjuster sleeves allow for on-vehicle adjustment
  • Vehicle specific taper pin provides OE-like fitment
  • PTFE Lined 7/8” FK Rod Ends for improved response
  • Built in o-ring sealed dust cover cap

The ICON Raptor Bump Stop System includes heavy duty steel clamshell brackets, a billet aluminum frame crossmember, adjustable tension rods, hydraulic bump stops, and all of the necessary hardware required to complete the installation. The clamshell brackets, crossmember, and tension rods add strength to the frame to prevent damage during extreme off-road use while increasing chassis rigidity for predictable handling and improved vehicle dynamics. The 2.5” travel hydraulic bump stops feature velocity sensitive technology which means that as the shaft speed increases the damping ability ramps up, resulting in exponential bottoming resistance that won’t negatively affect articulation. Combining all of these components into an easy to install, bolt-on package, ICON has developed the most comprehensive rear bump stop solution on the market for Raptor owners seeking the next level of strength and performance.

KEY FEATURES:

  • Bolt-on installation does not require any fabrication or removal of the bed
  • 2.5” travel hydraulic bump stop reduces rear end ‘kick’ and improves overall vehicle performance
  • Velocity sensitive technology exponentially increases bottom-out resistance
  • Vehicle specific bump stop tune provides smooth engagement and excellent ride quality
  • 6061 billet aluminum crossmember increases chassis rigidity to improve overall vehicle dynamics
  • Steel clamshell brackets strengthen the frame in critical areas to prevent damage from extreme off-road use
  • Adjustable tension rods allow the frame to be preloaded to withstand torsional force during hard impacts
  • Heavy duty 1.25” CNC machined nitro steel shafts
  • Multi-stage CAD plated body for maximum corrosion resistance
  • Replaceable noise-reducing striker pad
  • Fully serviceable
  • “ICON 1K” tested under rigorous off-road conditions to validate tune, performance, strength, and durability

The ICON Ford Raptor RXT multi-rate leaf pack offers a major performance gain for almost every Raptor setup imaginable. Features like 3 user-configurable rate options, tip inserts, and leaf separators add to ride comfort while a triple military wrapped front and rear half wrapped eyelet increases durability and strength of the leaf spring. A rebound leaf was added to reduce the axle wrap of the Raptor, which addresses another issue that has been found through ICON’s extensive testing. To increase the ride quality of the truck and gain additional droop travel when the full ICON RXT rear system is installed, the spring rate was reduced slightly from the OE components. While most Raptor owners will embrace this, there are those who have outfitted their trucks with a significant amount of weight in the form of a chase rack, spare tires and parts, or other additions. Understanding this, the leaf pack was designed with an additional leaf (included with kit) that can be exchanged or added to the pack, yielding an additional 10% or 20% spring rate that will handle heavier vehicles.

hidden field
ICON VEHICLE DYNAMICS JEEP JL 2.5" SUSPENSION SYSTEM - STAGE 2

$1499.00

image

Through an accelerated testing process dubbed the “ICON1K” R&D program, ICON has logged over a thousand miles in the dirt pushing the JL to off-road extremes to identify limiting factors in OE components, develop products that remove these limits, and further extrapolate performance out of this vehicle. This 2.5” suspension system has been tweaked, tuned, and revised several times over the course of this ICON1K testing in an effort to provide unparalleled ride quality and vehicle dynamics for everything from rock crawling to high-speed desert running.

The ICON Vehicle Dynamics Stage 2 2.5" Suspension System for the 2018-UP Jeep Wrangler JL is designed for the driver looking to drastically improve the performance and ride quality of their vehicle.  This Stage 2 system includes 2.5" lift dual rate coil springs, Vehicle Specific 2.0 Aluminum Series shocks, tubular steel front lower links, bump stop spacers, sway bar links, and all necessary hardware to complete the installation. With this combination of components, ICON was able to increase wheel travel numbers by over 30% (3" front, 2" rear), redefining the potential of the 2018-UP JL. The front lower links included with this system are constructed from thick wall steel tubing, provide increased castor numbers, and feature dual durometer bushings for noise free operation, maximum articulation, and minimal bind. The Stage 2 system allows for fitment of 35" tires when used with ICON's recommended wheel specifications. For users looking to install 37" tires, an optional bump stop spacer kit (PN: 22029) is available. 

KEY FEATURES:

  • 2.5" lift height
  • Fits 35" tires (37" with optional bump stop spacer kit PN: 22029)
  • 3" front, 2" rear increase in wheel travel
  • Improves on and off-road ride quality over stock
  • Dual rate coil springs with lifetime guarantee against sagging/breakage
  • 2.0 Aluminum Series shocks with vehicle specific valving
  • Tubular steel link arms with dual durometer bushings for noise free performance, maximum articulation, and minimal bind
  • 100% bolt-on system makes for an easy install
  • “ICON 1K” tested under rigorous off-road conditions to validate tune, performance, strength, and durability
 

TECH INFO:

  • Recommended wheel and tire fitment is based on a JL Rubicon
  • Advertised lift heights based on a stock, 4 door JL Rubicon
WHEEL & TIRE FITMENT INFO:

OEM Wheels & Tires: Yes

Aftermarket Wheels: 8.5 Wide, 4.75" Backspace

Aftermarket Tires: 35 x 12.50 (37 x 12.50 with optional bump stop spacer kit PN: 22029)

SYSTEM COMPONENTS:

22021 (QTY.1) | 18-UP JL LOWER FRONT LINK ARM KIT

22025 (QTY.1) | 18-UP JL 2.5" FRONT DUAL RATE COIL SPRING KIT

22026 (QTY.1) | 18-UP JL 2.5" REAR DUAL RATE COIL SPRING KIT

26523 (QTY.2) | 18-UP JL 2.5" FRONT 2.0 ALUMINUM SERIES SHOCK VS IR

26524 (QTY.2) | 18-UP JL 2.5" REAR 2.0 ALUMINUM SERIES SHOCK VS IR

hidden field
ICON VEHICLE DYNAMICS JEEP JL 2.5" SUSPENSION SYSTEM - STAGE 5

$3499.00

image

Through an accelerated testing process dubbed the “ICON1K” R&D program, ICON has logged over a thousand miles in the dirt pushing the JL to off-road extremes to identify limiting factors in OE components, develop products that remove these limits, and further extrapolate performance out of this vehicle. This 2.5” suspension system has been tweaked, tuned, and revised several times over the course of this ICON1K testing in an effort to provide unparalleled ride quality and vehicle dynamics for everything from rock crawling to high-speed desert running.

The ICON Vehicle Dynamics Stage 5 2.5" Suspension System for the 2018-UP Jeep Wrangler JL is designed for the driver looking to drastically improve the performance and ride quality of their vehicle.  This Stage 5 system includes 2.5" lift dual rate coil springs, upgraded 2.5 Series shocks with vehicle specific valving, tubular steel front lower links, adjustable front and rear track bars, bump stop spacers, sway bar links, and all necessary hardware to complete the installation. With this combination of components, ICON was able to increase wheel travel numbers by over 30% (3" front, 2" rear), redefining the potential of the 2018-UP JL. The front lower links included with this system are constructed from thick wall steel tubing, provide increased castor numbers, and feature dual durometer bushings for noise free operation, maximum articulation, and minimal bind. The Stage 5 system allows for fitment of 35" tires when used with ICON's recommended wheel specifications. For users looking to install 37" tires, an optional bump stop spacer kit (PN: 22029) is available. 

KEY FEATURES:

  • 2.5" lift height
  • Fits 35" tires (37" with optional bump stop spacer kit PN: 22029)
  • 3" front, 2" rear increase in wheel travel
  • Improves on and off-road ride quality over stock
  • Dual rate coil springs with lifetime guarantee against sagging/breakage
  • 2.5 Series shocks with vehicle specific valving
  • Tubular steel link arms with dual durometer bushings for noise free performance, maximum articulation, and minimal bind
  • 100% bolt-on system makes for an easy install
  • “ICON 1K” tested under rigorous off-road conditions to validate tune, performance, strength, and durability
 
WHEEL & TIRE FITMENT INFO:

OEM Wheels & Tires: Yes

[NON-RUBICON]

  • Aftermarket Wheels: 8.5″ Wide, 4.5″ backspace
  • Aftermarket Tires : 35" x 12.50 (Larger tires will fit with recommended bump stop spacer kit and minor trimming)

[RUBICON]

  • Aftermarket Wheels: 8.5″ Wide, 4.75″ backspace
  • Aftermarket Tires: 35" X 12.50 (37" tires will fit with recommended bump stop spacer kit PN: 22029)
 

SYSTEM COMPONENTS:

22021 (QTY.1) | 18-UP JL FRONT FIXED LOWER LINK KIT

22025 (QTY.1) | 18-UP JL 2.5" FRONT DUAL RATE COIL SPRING KIT

22026 (QTY.1) | 18-UP JL 2.5" REAR DUAL RATE COIL SPRING KIT

22027 (QTY.1) | 18-UP JL FRONT ADJ TRACK BAR KIT

22028 (QTY.1) | 18-UP JL REAR ADJ TRACK BAR KIT

27821P (QTY.1) | 18-UP JL 2.5" FRONT 2.5 VS RR PAIR

27726P (QTY.1) | 18-UP JL 2.5" REAR 2.5 VS PB PAIR

hidden field
ICON VEHICLE DYNAMICS JEEP JL 2.5" SUSPENSION SYSTEM - STAGE 8

$5149.00

image

Through an accelerated testing process dubbed the “ICON1K” R&D program, ICON has logged over a thousand miles in the dirt pushing the JL to off-road extremes to identify limiting factors in OE components, develop products that remove these limits, and further extrapolate performance out of this vehicle. This 2.5” suspension system has been tweaked, tuned, and revised several times over the course of this ICON1K testing in an effort to provide unparalleled ride quality and vehicle dynamics for everything from rock crawling to high-speed desert running.

The ICON Vehicle Dynamics Stage 8 2.5" Suspension System for the 2018-UP Jeep Wrangler JL is designed for the driver looking to drastically improve the performance and ride quality of their vehicle.  This Stage 8 system includes 2.5" lift dual rate coil springs, upgraded 2.5 Series remote reservoir shocks with vehicle specific valving and ICON's CDC (Compression Damping Control) technology, tubular steel adjustable front upper links, fixed front lower links, fixed rear upper links, adjustable rear lower links, adjustable front and rear track bars, bump stop spacers, sway bar links, and all necessary hardware to complete the installation. With this combination of components, ICON was able to increase wheel travel numbers by over 30% (3" front, 2" rear), redefining the potential of the 2018-UP JL. The front lower links included with this system are constructed from thick wall steel tubing, provide increased castor numbers, and feature dual durometer bushings for noise free operation, maximum articulation, and minimal bind. The Stage 8 system allows for fitment of 35" tires when used with ICON's recommended wheel specifications. For users looking to install 37" tires, an optional bump stop spacer kit (PN: 22029) is available. 

KEY FEATURES:

  • 2.5" lift height
  • Fits 35" tires (37" with optional bump stop spacer kit PN: 22029)
  • 3" front, 2" rear increase in wheel travel
  • Improves on and off-road ride quality over stock
  • Dual rate coil springs with lifetime guarantee against sagging/breakage
  • 2.5 Series shocks with vehicle specific valving
  • Tubular steel link arms with dual durometer bushings for noise free performance, maximum articulation, and minimal bind
  • 100% bolt-on system makes for an easy install
  • “ICON 1K” tested under rigorous off-road conditions to validate tune, performance, strength, and durability
 
WHEEL & TIRE FITMENT INFO:

OEM Wheels & Tires: Yes

[NON-RUBICON]

  • Aftermarket Wheels: 8.5″ Wide, 4.5″ backspace
  • Aftermarket Tires : 35" x 12.50 (Larger tires will fit with recommended bump stop spacer kit and minor trimming)

[RUBICON]

  • Aftermarket Wheels: 8.5″ Wide, 4.75″ backspace
  • Aftermarket Tires: 35" X 12.50 (37" tires will fit with recommended bump stop spacer kit PN: 22029)
 

SYSTEM COMPONENTS:

22021 (QTY.1) | 18-UP JL FRONT FIXED LOWER LINK KIT

22022 (QTY.1) | 18-UP JL FRONT ADJ UPPER LINK KIT

22023 (QTY.1) | 18-UP JL REAR ADJ LOWER LINK KIT

22024 (QTY.1) | 18-UP JL REAR FIXED UPPER LINK KIT

22025 (QTY.1) | 18-UP JL 2.5" FRONT DUAL RATE COIL SPRING KIT

22026 (QTY.1) | 18-UP JL 2.5" REAR DUAL RATE COIL SPRING KIT

22027 (QTY.1) | 18-UP JL FRONT ADJ TRACK BAR KIT

22028 (QTY.1) | 18-UP JL REAR ADJ TRACK BAR KIT

27821CP (QTY.1) | 18-UP JL 2.5" FRONT 2.5 VS RR CDCV PAIR

27726CP (QTY.1) | 18-UP JL 2.5" REAR 2.5 VS PB CDCV PAIR

hidden field
  • CLEAR ALL

LGE-CTS Motorsports

882 W Cienega Ave,

San dimas, CA 91773

Phone. 909-599-2203

Email. TRICIA@LGE-PAINT.COM